sexy asin,igg poker,free spins mega fortune,Extruder Machines

single-digit-lottery

Extruders are used for the continuous forming of products. Extruders take a mass of product and forces the product through a former, often called a die plate, to create the proper form in the extruded product. The extruder uses a mechanism, usually a single screw or counter rotating double screws, to work the product together and pushes the product forward with enough force to push the mass of product through the forming die plate. Extruder barrels (the area where the screw processes the product) are often jacketed to maintain a specific heat for the process. Forming die plates are specific to the product that is being formed. The ability to form and shape products and provide consistency make extruders an important piece of equipment for many industries.

Contact Us
league-adda

18 games online

  • Manufacturer: Extrutech
  • Model Number: S/SKNIFE
  • abhilasha mhatre Number: 5G5600

Extrutech stainless steel knife drive. Equipped with 5hp variable speed drive with a 3.25:1 ratio and an output RPM range of 157 to 920. Unit mounted on a stainless steel stand.

OAD: 53"L x 36"W x 54"H

Get a Free Quote Call: 630-629-9900

sportium login

  • Manufacturer: Buhler-Maig
  • Model Number: M-MN-400
  • abhilasha mhatre Number: 5H6570

Buhler Maig Model M-MN-400, inline, single screw extruder with productions rates per hour – depending on materials and application. Equipped with product portioner that has product feed hopper with dual 36" long x 2" OD screws feeding 58" long x 4-1/4" OD single screw extruder with 36" long x 4-1/2" OD single barrel and 8-1/2" OD / 4-1/2" ID flanged end product discharge port with (6) 3/4" bolt holes set on 6" centers and 36" floor clearence. Buhler Maig Micro dosing feeder for consitent volumetric proportioning of micro-ingredients such as vitamins, ascorbic acid, dry gluten, egg powder as well as flavoring agents and colorants, thats feeding into the dual screw portioner section that is feeding the single screw extruder. Main remote control panel has A/B CPU and stand alone controller with manual, auto, auto clean, standard and nominal run, mixer kneader and mixer kneader up / down, press screw fill water pipe, dosers with on / off switch e-stop and e-stop reset controls and individual temperature controller and a Mokon water heater. All mounted on individual frames.

OAD: 108" L x 48" W x 67" H Screw Extruder
40" L x 48" W x 74" H # (1) Doser
35" L x 32" W x 55" H # (2) Doser
30" L x 30" W x 82" H Main Control Panel
36" L x 20" W x 24" H Mokon Water Heater

Get a Free Quote Call: 630-629-9900

5p roulette

  • Manufacturer: Hosokawa Bepex
  • Model Number: FP200AA
  • abhilasha mhatre Number: 5G9628

Hosokawa / Bepex / Hutt, Model FP 200 AA, automatic, rotary bar roller press with pounds of product per hour – depending on materials, application and machine configuration. Equipped with a 30" long x 5" wide x 19" deep jacketed product feed hopper and (2) 200mm diameter x 800mm long jacketed rollers. Control panel with push button start / stop controls. Mounted on (4) leg base frame.

Hopper Jacket:
(1) ¾" NPT
(3) ¼" NPT

Roller Jacket:
(2) ¾" NPT

OAD: 90"L x 44"W x 80"H

Get a Free Quote Call: 630-629-9900

play lion king online casino game

  • Manufacturer: Hosokawa Bepex
  • Model Number: DP200800
  • abhilasha mhatre Number: 5G9629

Hosokawa / Bepex / Hutt, Model DP 200-800, automatic, rotary bar roller press with pounds of product per hour – depending on materials, application and machine configuration. Equipped with a 30" long x 5" wide x 19" deep jacketed product feed hopper and (2) 200mm diameter x 800mm long jacketed rollers. Control panel with push button start / stop controls. Mounted on (4) leg base frame.

Hopper Jacket:
(1) ¾" NPT
(3) ¼" NPT

Roller Jacket:
(2) ¾" NPT

OAD: 90"L x 44"W x 78"H

Get a Free Quote Call: 630-629-9900

best horse racing betting sites

  • Manufacturer: Bonnot
  • Model Number: 2 1/4
  • abhilasha mhatre Number: 5C4282

Bonnot single screw extruder rated up to 120 lbs per hour – depending on materials and application. 100% jacketed for both water or steam with temperature range of: -85 Deg F up to 550 Deg F and temperture is precisely controlled in each zone of the hollow sectionalized jacketed barrels (40" Long) with 2-1/2" OD screw. The liners are made of hardened stainless steel with all smooth interiors. Variable speed with extrusion pressures ranging from 100 psi up to 5,000 psi. Control Panel has A/B Powerflex vari-speed controller with start / stop push buttons. This is a cooking extruder that continuously cooks pre-mixed, semi moist and moist materials. Mounted on heavy duty base frame.

OAD: 87" L x 41" W x 48" H

Get a Free Quote Call: 630-629-9900

football betting slip

  • Manufacturer: Berlyn
  • Model Number: 1-1/4EXT
  • abhilasha mhatre Number: 5C3473

Five zone extruder. Equipped with a stainless steel product hopper, flanged product in feed port, 1-1/4" diameter by 36" long stainless steel screw. Each zone is electrically heated (individual controlled to 800°F) and air cooled through copper tubing and fan system. L to D Ratio of 24:1. Variable speed drive up to 125rpm. Caster base.

OAD: 60" L x 36" W x 40" H

Get a Free Quote Call: 630-629-9900

india west indies live match

Bausano and Figli Spa Model TR2-100-5/A variable speed, counter rotating twin screw extruder with pounds of product per hour – depending on materials and application. Equipped with (2) screws measuring 100mm (3.937") wide x 44" long. Equipped with product infeed hopper into a 5" long x 5" wide feed throat, (5) electrical heating zones, and dual cooling zones into a heated transition head with 60mm x 550mm opening. Has L/D ratio of 11:1, 60 rpm max shaft speed and vari speed drive. and has remote control panel. Mounted on heavy duty frame.

OAD: 150" L x 32" W x 74" H

Get a Free Quote Call: 630-629-9900

bet365 no deposit bonus code 2019

Variable speed counter rotating twin screw extruder. Equipped with two screws measuring 100mm (3.937") wide x 44" long. Features product infeed hopper into a 5"L x 5"W feed throat, five electrical heating zones, dual cooling zones into a heated transition head with a 60mm x 550mm opening. Unit has L/D ratio of 11:1, 60 rpm max shaft speed and vari speed drive.

OAD: 150" L x 32" W x 74" H

Get a Free Quote Call: 630-629-9900

dafabet login in india

Hosokawa Confectionary Model FP200-1000 Automatic, rotary formpress, roller slab press, with amount of product per hour – depending on materials and application. Equipped with (3) smooth rollers designed for both pressure sensitive or beaten materials, like white nogut, candy cream and carmalized masses, which are normally processed at tempatures up to 100 Deg C, creating slabs of product with working widths from 300mm – 1000mm (with proper change parts). Has 92mm OD (left), 180mm OD (right) and 200mm OD (bottom) smooth roller sections, all 1150mm long. Hartman 1 Q + 510A-2A weigh scale controller with panel view. Mounted on heavy duty frame.

OAD: 76" L x 47" W x 160" H

Get a Free Quote Call: 630-629-9900

betika live

Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 Equipped with (9) 7" long jacketed barrel sections for heating and cooling, 3.5" diameter feed area with additional in feed area of 28" downstream

OAD: (L) 186" x (W) 40" x (H) 78"

Get a Free Quote Call: 630-629-9900

rummy guru paytm cash app download

  • Manufacturer: Sigma Equipment
  • Model Number: LE3D
  • abhilasha mhatre Number: 5G9769

Sigma, Model LE-3D, duplex vacuum plodder/extruder. Capable of processing 40 kg/hr – depending on materials, application and machine configuration. Equipped with 13½" long x 12"wide x 8" deep stainless steel supply hopper with safety grid. Upper stage has 3" diameter x 12" long water cooled screw into a refining plate and vacuum chamber. Lower stage has 3" diameter x 12" long water cooled screw into a refining plate and electrically heated extrusion cone with 1¾" ID outlet with 30" ground clearance. Control panel with on / off switches for vacuum pump and heater and independent variable speed controls for upper and lower stage screws. Water cooling is supplied by (2) ½" NPT fittings.

OAD: 55"L x 41"W x 80"H

Get a Free Quote Call: 630-629-9900

casino slots free play for fun

  • Manufacturer: Wenger
  • Model Number: X20
  • abhilasha mhatre Number: R27500

Single screw extruder will continuously cook 100 to 1,000 Lbs/Hr of grain & cereal based products depending on size, shape, & density required. Extruder is a 3.25"dia x 30" length w/ 6 heads (barrels), jacketed for hot water. System consists of Accurate 1-1/2 screw feeder to a Wenger dual 6" dia x 30"L SS conditioner w/ 1.5 HP drive, . Also has a Toshiba AC frequency inverter. Ideal barrel size for starch base products like cereal. Includes a Rotary knife cut-off that is hinged to swing away for clean-up.

Get a Free Quote Call: 630-629-9900